SpiralFlex, Hose identification

SpiralFlex for hydraulic hose markers make it easy to identify hydraulic hoses and connect them to agricultural equipment.
SpiralFlex can be used on any hydraulic hose or on any pipe that connects equipment using hydraulics.
57 different variants with 9 different colors.
You do not need tools, just loop the SpiralFlex over the hose.

SpiralFlex, Hose identification
Show Filters

Showing all 7 results

SpiralFlex from SB-Flex is easy to install and can be reused again. Attach one end and loop the spiral over the hose.

Each color with PLUS and MINUS has different lengths so they are easier to tell the difference.

Fits hoses from 1 / 4¨ inches and up, some 1 / 4¨ inch hoses can be fitted with a cable tie if the SpiralFlex slides down.

SPRIAL-Flex marking is available with 9 different color codes marked with signs, numbers and symbols for easy identification. A total of 57 different varieties.

  • All colors are available with print + & – and are made with laser for easier indication the hoses or pipes.
  • SPRIAL marking can withstand temperatures from -50C to 100C degrees.
  • SPRIAL hose marking from SB-Flex is made of polyethylene. Color coding is done in the casting process so that it is the same unit so that it does not fade or crack.
  • The SPRIAL hose marking is very robust and is not affected by grease, oil or dirt; it can be cleaned with solvent or soap.
  • Easy to assemble, no tools required. Easy to change to suit the operator.